Universal Radius Tool Grinder - Monaset CM-2
CM-2 Enduser
Monaset Catalog
Monaset
Price List
CAPACITY
Workhead:
Swing over main slide, max dia: 12" (304mm)
Collet work dia,:
--max: 1.25" (31mm)
--min 0.12" (3mm)
Lead generated by spiral lead mechanism min: 1.81" (45mm)
Length between spindle nose and tail center max: 6" (152mm)
Wheelhead:
Grinding wheel dia, max: 4" (101mm)RANGE
Workhead:
Main slide travel: 5.75" (146mm)
Offset slide travel, total: 5.25" (133mm)
--Front of center: 3" (76mm)
--Rear of center: 2.25" (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base): 235 degrees
Vertical plane:
--Above center: 40 degrees
--Below center: 40 degrees
Wheelhead:
Longitudinal slide travel: 6" (152mm)
Vertical slide travel, total: 9.50" (241mm)
--Above center: 4.50" (114mm)
--Below center: 5" (127mm)
Cross slide travel, total: 7.50" (190mm)
--Front of center: 3" (76mm)
--Rear of center: 4.50" (114mm)
SPINDLE SPEEDS
(±0%,-8% variation allowable)
Workhead, one speed: 436 rpm
Wheelhead, three speeds: 4000, 5729 and 8000 rpm
(motor speed @ 3600 rpm)
Internal grinding attachment (extra cost), three speeds,
approx: 16410, 23510, and 32820 rpm |
 |
MOTORS,
ELECTRIC
Workhead drive, AC: includes reverse 1/4 hp (0.186 kW)
Wheelhead drive, AC: 1/2 hp (.373 kW)
FLOOR SPACE & WEIGHT
Area of base only: 25"x26" (635mmx660mm)
Area required for machine (including swivel and overtravel movements):
60"x67" (1524mmx1701mm)
Height from floor to center of workhead spindle: 47.72" (1212mm)
Height, overall with wheelhead raised: 62.12" (1577mm)
Net weight (including motors and controls): 1525 lbs (691 kilograms)
|
*All prices & specifications subject to change
without notice.
|
